Protecting Public Health and the Environment.

Current Permits Issued by DEQ

DEQ issues permits to regulate emissions of air pollutants, reuse of recycled water, and treatment, storage and disposal of hazardous wastes. The purpose of environmental permits is to protect public health and the environment. Permits establish the conditions under which facilities that generate pollution may operate. Permits represent a contract between the businesses and the government that the facilities will comply with applicable state and federal pollution control laws.

Instructions: Permits currently in effect may be accessed in the table below. Select the number of records you would like to view at one time (ranging from 10 to All), the permit type (such as Air - PTC or Wastewater Reuse or All), and the sort order (alphabetical or by date). Then click on the Filter Results button.

(To locate a permit for a specific facility, enter the facility name in the Search the site box on the top right corner of this page and click the GO button. On the Search Results page, select Permits from the criteria on the right side of that page to limit the search to permits only.)


Records 441 to 450 of 1126
PermitteePermit NumberPermit TypeEffective DateExpire DateDocument Links
Idaho Forest Group, LLC
Moyie Springs, ID
P-2012.0034Air - PTC06/04/18Permit

Statement of Basis

Response to Comments
Idaho Fresh Pak, Inc.
Glenns Ferry, ID
P-060053Air - PTC11/15/07Permit

Statement of Basis
Idaho Fresh Pak, Inc.
Rupert, ID
P-060447Air - PTC03/06/08Permit

Statement of Basis
Idaho Military Division
Boise, ID
P-2013.0033Air - PTC07/31/13Permit

Statement of Basis
Idaho Milk Products, Inc.
Jerome, ID
P-2007.0205Air - PTC06/19/13Permit

Statement of Basis
Idaho Minerals
Malad, ID
P-2017.0005Air - PTC02/17/17Permit

Statement of Basis
Idaho National Laboratory, Advanced Mixed Waste Treatment Project (AMWTP)
Idaho Falls, ID
EPA ID#: ID4890008952Hazardous Waste05/20/1905/19/29Partial Permit

Attachment 1: Facility Description

Attachment 2: Waste Characterization

Attachment 3: Security

Attachment 4: Inspections

Attachment 5: Training Plan

Attachment 6: Procedures to Prevent Hazards

Attachment 7: Contingency Plan

Attachment 8: Closure Plan

Attachment 9: Permit Revision Log
Idaho National Laboratory, INTEC New Percolation Ponds
Idaho Falls, ID
M-130-06Wastewater Reuse06/01/1706/01/24Permit
Idaho National Laboratory, Materials and Fuels Complex (MFC)
Industrial waste ditch located at the southeastern corner of INL, approx. 36 miles west of Idaho Falls in Bingham County
I-160-02Wastewater Reuse01/26/1701/25/27Permit
Idaho National Laboratory, Materials Fuels Complex (MFC) - Experimental Fuels Facility (EFF) - Hot Fuel Examination Facility (HFEF) - Radioactive Scrap and Waste Facility (RSWF) - Sodium Components Maintenance Shop (SCMS) - Sodium Storage Building (SSB)
Idaho Falls, ID
EPA ID#: ID4890008952Hazardous Waste10/01/1510/01/25Partial Permit (April 2018)

Attachment 1A – Part A (October 2017)

Attachment 1B - Facility Description (April 2018)

Attachment 1D – Process Description (April 2018)

Attachment 2 - Waste Analysis Plan (October 2017)

Attachment 3 - Security (October 2017)

Attachment 4 - Inspections (April 2018)

Attachment 5 - Personnel Training (October 2015)

Attachment 6 - Procedures to Prevent Hazards (April 2018)

Attachment 7 - Contingency Plan (April 2018)

Attachment 8 - Closure Plan (October 2015)

Attachment 9 – FFA/CO (October 2015)

Attachment 10 – Revision Log (April 2018)



Staff Contacts